1. Read Codes
2. Erase Codes
3. I/M Readiness -- I/M Readiness indicates whether or not the various
emissions-related systems on the vehicle are operating properly and are
ready for Inspection and Maintenance testing.
4. Data Stream
5. Freeze Frame -- When an emission-related fault occurs,
certain vehicle conditions are recorded by the on-board
computer. This information is referred to as freeze
frame data. Freeze Data is a snapshot of
the operating conditions at the time of
an emission related fault.
6. O2 Sensor Test -- This option allows retrieval and
viewing of O2 sensor test results for most recently
performed tests from the vehicle ' s on-board computer.
7. On-Board Monitoring -- This function can be utilized
to read the results of on-board diagnostic monitoring tests
for specific components/systems.
8. Evap System Test -- The EVAP test function lets you
initiate a leak test for the vehicle's EVAP system.
Before using the system test function, refer to
the vehicle's service repair manual to determine
the procedures necessary to stop the test.
9. Vehicle Information -- The option displays the vehicle
identification number (VIN), the calibration verification
number (CVN), and other information of the test vehicle.
10. Retrieve generic (P0, P2, P3, and U0), manufacturer
specific (P1, P3, and U1) codes and pending codes
11. Turn off Check Engine Light (MIL),
clear codes and reset monitors
12. Read live PCM data stream
13. Support CAN (Controller Area Network) and all other
14. Multilingual menu and DTC definitions- English, Spanish, and German, etc.